FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Coolant Temperature Sensor
INSPECTION
1. Check that the engine coolant temperature sensor has no deformation, cracks or other damages.
2. Immerse the engine coolant temperature sensor and a thermometer in water.
CAUTION:
Take care not to allow water to get into the engine coolant temperature sensor connector. Completely remove any water inside.
(A) | Thermometer | (B) | Engine coolant temperature sensor | (C) | Hexagonal part height: To approx.1/3 |
3. Raise water temperature gradually, measure the resistance between the engine coolant temperature sensor terminals when the temperature is 20°C (68°F) and 80°C (176°F).
NOTE:
Agitate the water for even temperature distribution.
Water temperature | Terminal No. | Standard |
20°C (68°F) | 1 and 2 | Approx. 2.45±0.2 k? |
80°C (176°F) | Approx. 0.318±0.013 k? |
Note
POWER ASSISTED SYSTEM (POWER STEERING) > Power Steering SystemNOTEFor procedure of each component in the power steering system, refer to the respective section.• Steering wheel: Steering Wheel">• Universal joint assembly - steering: Universal Joint">• Steering ...
Fuel filler lid and cap
Locations of the fuel filler lid and
the lid release lever
Fuel filler lid
Fuel filler lid release lever
Refueling
Only one person should be involved in
refueling. Do not allow others to approach
the area of the vehicle near the fuel filler
pipe while refueling is in progress.
Be ...
Ebd warning light, abs warning, vdc off indicator light, vdc warning light and vdc indicator light do not come on
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Warning Light Illumination PatternEBD WARNING LIGHT, ABS WARNING, VDC OFF INDICATOR LIGHT, VDC WARNING LIGHT AND VDC INDICATOR LIGHT DO NOT COME ONDetecting condition:Defective combination meterTrouble symptom:When the ignition switch is turned to ON ...