FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Control Module (ECM)
INSPECTION
Check that the ECM has no deformation, cracks or other damages.
Disassembly
CLUTCH SYSTEM > Operating CylinderDISASSEMBLY1. Remove the boot and push rod.2. Apply compressed air through clutch hose attachment hole.NOTE:Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.3. Separate the piston and piston spring. ...
Component
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > General DescriptionCOMPONENT1. CANISTER, LEAK CHECK VALVE ASSEMBLY AND DRAIN SEPARATORFor structures of the canister, leak check valve assembly and drain separator, refer to “FU (H4DO)”. General Description > COMPONENT" ...
Installation
EXHAUST(H4DO) > Center Exhaust PipeINSTALLATION1. Install the center exhaust pipe upper cover to the center exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb)2. Temporarily tighten the nuts which secure the center exhaust pipe to the front exhaust pipe.NOTE:Use a new gasket.3. In ...