Subaru Crosstrek Service Manual: Inspection

Subaru Crosstrek Service Manual / Entertainment / Data communication module / Inspection

ENTERTAINMENT > Data Communication Module

INSPECTION

1. BACKUP BATTERY

1. Measure the voltage between connector terminals.

Preparation tool:

Circuit tester

Terminal No.	Standard
1 (+) — 2 (−)	2 V or more

2. Replace the backup battery if the inspection result is not within the standard value.

Removal

ENTERTAINMENT > Data Communication ModuleREMOVAL1. DATA COMMUNICATION MODULECAUTION:Before handling the airbag system components, always refer to “CAUTION” of “General Description ...

Other materials:

Adjustment
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Idler GearADJUSTMENT1. Select the appropriate reverse shifter lever from the table below, and adjust until the clearance between the reverse idler gear and transmission case wall is within specification.Clearance A:6.0 — 7.5 mm (0.236 — 0.29 ...

Removal
FRONT SUSPENSION > Front CrossmemberREMOVALCAUTION:• The power steering control module continues to operate after the engine stops and calculate the temperature in the control module. Therefore, before starting service of the power steering system which requires disconnection of the connect ...

To arm the system using power door locking switches
1. Close all windows. 2. Remove the key from the ignition switch (models without "keyless access with push-button start system")/turn the push-button ignition switch to the "OFF" position (models with "keyless access with push-button start system"). 3. Open the doors and get out of the v ...