Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

CRUISE CONTROL SYSTEM > Cruise Control Command Switch

INSPECTION

1. Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Terminal No.

Inspection conditions

Standard

3 — 9

CANCEL

SET/−

RES/+

All OFF

Approx. 4,020 ?

CANCEL

ON

Less than 1 ?

SET/−

ON

Approx. 250 ?

RES/+

ON

Approx. 1,470 ?

4 — 9

CRUISE

(MAIN)

OFF

1 M? or more

ON

Less than 1 ?

2. Apply battery voltage between the connector terminals to check lighting condition of illumination inside the switch.

Terminal No.

Inspection conditions

Specification

10 (+) — 11 (−)

Apply battery voltage.

Light ON

3. Replace the cruise control command switch assembly if it is found defective.

Cruise control command switch
...

Removal
CRUISE CONTROL SYSTEM > Cruise Control Command SwitchREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBA ...

Other materials:

Inspection
GLASS/WINDOWS/MIRRORS > Power Window Control SwitchINSPECTION1. MAIN SWITCH• Driver’s seatCAUTION:Since the switch - power window main is controlled by CPU, do not check continuity for switch alone with the circuit tester. Performing continuity check with circuit tester can damage the ...

Safety precautions
WARNING Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed. CAUTION Vehicles are filled at the factory ...

Menu screens
Pull the " /SET" switch to enter the menu screens when all of the following conditions are satisfied. The vehicle has been completely stopped. The select lever is in the "P" position. The menu screen entering screen is selected. The "  " information reminder is off. Th ...

© 2016-2022 Copyright www.sucross.com