Subaru Crosstrek Service Manual: Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven Gear
INSPECTION
• Check the ball bearing for smooth rotation.
• Check the ball bearing for excessive looseness.
• Check the transfer driven gear for breakage or damage.
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearDISASSEMBLY1. Remove the ball bearing using ST.ST1 498077400BEARING REMOVERST2 899864100REMOVER ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearINSTALLATION1. Install the transfer driven gear assembly.2. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION& ...
Other materials:
Installation
INSTRUMENTATION/DRIVER INFO > Steering SwitchINSTALLATIONCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Do not allow harness and co ...
Removal
BRAKE > Brake HoseREMOVAL1. FRONT BRAKE HOSE1. Disconnect the brake pipe (b) from the brake hose (a).Preparation tool:Flare nut wrench2. Remove the clamp, strut mounting bolt and union bolt, and remove the front brake hose.2. REAR BRAKE HOSE1. Remove the brake hose bracket bolt and union bolt.2. ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Ambient SensorREMOVAL1. Disconnect the ground cable from battery. Battery > REMOVAL">2. Remove the ambient sensor.(1) Disconnect the connector.(2) Release the claws, and then remove the ambient sensor from the bracket. ...
