Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump Chain

INSPECTION

Check the oil pump chain for damage.

Replace if gear teeth are broken, damaged, sharpen or excessively worn.

Check the bearing for seizure or wear.

Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.

Check the oil pump chain cover for damage.

Check for leakage of CVTF from the mating surface of oil pump chain cover.

Check the oil seal for damage.

Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainDISASSEMBLY1. DRIVE SPROCKET1. Remove the snap ring.2. Remove the ball bearing using ST.ST1 498077600REMOVERST2 399513600INSTALLER ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainINSTALLATION1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a ...

Other materials:

Dtc c2511 torque sensor main
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2511 TORQUE SENSOR MAINTrouble symptom:• The steering wheel operation feels heavy.• STEERING warning light illuminates.Wiring diagram:Electric power steering system Elec ...

Airbag warning light illumination pattern Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Airbag Warning Light Illumination PatternINSPECTIONTurn the ignition switch to ON, and confirm that the airbag warning light remains on for approx. 6 seconds then turns off afterwards.(1)Airbag warning light(2)Approx. 6 seconds(3)Ignition switch ON ...

Road test Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Road TestINSPECTION1. GENERAL PRECAUTIONRoad tests should be conducted to properly diagnose the condition of CVT.CAUTION:Always observe the local traffic laws when performing the test.2. D RANGE SHIFT FUNCTIONMake sure that the engine speed is 1,100 — ...

© 2016-2024 Copyright www.sucross.com