CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch Assembly
INSPECTION
• Check the forward clutch drum, internal gear, sun gear and forward clutch piston lip for wear or damage.
• Inspect the drive plate facing for wear and damage.
• Check the driven plate for discoloration (burnt color).
• Check for worn snap ring, fatigue or damaged return spring or deformed spring retainer.
• Make sure the clearance between retaining plate and internal gear of forward clutch is within the limit. If it exceeds the standard, replace the forward clutch. Forward Clutch Assembly > ASSEMBLY">
Continuously variable transmission
WARNING
Do not shift from the "P" or "N"
position into the "D" or "R" position
while depressing the accelerator
pedal. This may cause the vehicle
to jump forward or backward.
CAUTION
Observe the following precautions.
Failure to observe these
precautions could cause damage
to the transmi ...
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Front Differential AssemblyDISASSEMBLY1. DIFFERENTIAL CASE ASSEMBLY1. Remove the taper roller bearing using the ST.ST1 498077000REMOVERST2 899864100REMOVERST3 398497701SEAT2. Remove the hypoid driven gear mounting bolt using the ST.ST 18270K ...
Entering the vehicle while it is running via remote start
1. Unlock the vehicle doors using the
keyless access function (if equipped) or
remote keyless entry system. If the vehicle's
doors are unlocked manually using
the key, the vehicle's alarm system will
trigger (if the alarm system is armed prior
to activating the remote engine start
system) and ...