Subaru Crosstrek Service Manual: Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Control Valve Body
INSPECTION
• Check each part for damage or dust.
• Measure the resistance of each solenoid, sensor and ground wire.
NOTE:
Measurement should be performed at a temperature of 20°C (68°F).
• Solenoid
Solenoid | Terminal No. | Standard |
Primary UP solenoid | No. 2 — control valve body | Approx. 10 — 13.5 ? |
Secondary solenoid | No. 3 — control valve body | Approx. 5 — 7 ? |
F&R clutch solenoid | No. 4 — control valve body | Approx. 4 — 6 ? |
Primary DOWN solenoid | No. 7 — control valve body | Approx. 10 — 13.5 ? |
Lock-up duty solenoid | No. 9 — control valve body | Approx. 10 — 13.5 ? |
AWD solenoid | No. 10 — control valve body | Approx. 2 — 4.5 ? |
• Oil temperature sensor
Sensor | Terminal No. | Standard At 20°C (68°F) |
Oil temperature sensor | No. 1 — No. 6 | Approx. 2.5 k? |
• Transmission ground
Terminal No. | Standard |
No. 8 — control valve body | Less than 1 ? |
Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Control Valve BodyREMOVALCAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be c ...
Other materials:
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transmission Gear OilINSPECTION1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF, and wait until the engine cools.3. Remove the oil level gauge and wipe it clean.4. Reinsert the oil level gauge all the way. Be sure that the oil l ...
Inspection
CONTROL SYSTEMS > AT Shift Lock Solenoid and “P” Range SwitchINSPECTIONSTEPCHECKYESNO1.CHECK SOLENOID UNIT.Measure the resistance of solenoid unit connector terminals.TerminalsNo. 4 — No. 3:Is the resistance 27.6 — 30.5 ?? AT Shift Lock Solenoid and “P” Range Switch &g ...
Refueling in cold weather
To help prevent moisture from forming in
the fuel system and the risk of its freezing,
use of an antifreeze additive in the fuel
tank is recommended during cold weather.
Use only additives that are specifically
designed for this purpose. When an
antifreeze additive is used, its effect lasts
...