Subaru Crosstrek Service Manual: Inspection

Check the hose for peeling, crack or clogging.

Air breather hose

Removal

Other materials:

Inspection
LIGHTING SYSTEM > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wiring harness.2. CHECK RELAY1. Check the resistance between relay terminals.Terminal No.Inspection condit ...

Installation
EXHAUST(H4DO) > MufflerINSTALLATIONInstall in the reverse order of removal.NOTE:• Use a new gasket and self-locking nut.• After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb)Ti ...

High/low beam change (dimmer)
High beam Low beam In the Subaru Ascent, switching between high beam and low beam headlights is performed using the dimmer control integrated into the turn signal lever. This system allows the driver to quickly adapt lighting intensity depending on road conditions, visibility, and ...