COMMUNICATION SYSTEM > Horn
INSPECTION
1. CHECK HORN ASSEMBLY
1. Remove the horn assembly (Hi & Lo). Horn > REMOVAL">
2. Check the horn sounds when applying the battery voltage to the horn assembly.
Terminal No. | Inspection conditions | Specification |
Horn terminal (+) — Horn case (−) | Connect battery to the terminals | Sounds |
3. If it does not operate normally, replace the horn assembly.
Replacement
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear OilREPLACEMENTCAUTION:• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to burn yourself.• Be careful not to spill differential gear oil ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Forward Clutch AssemblyINSTALLATION1. Install the thrust bearing to the converter case.NOTE:Face the temper color surface to the converter case side.2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-Vehicle Sensor (Auto A/C Model)REMOVALCAUTION:Be careful not to damage the sensors and interior trims when removing.1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. NOTE">2. Remove the cover assemb ...