BRAKE > Rear Disc Brake Assembly
INSPECTION
1. Check the caliper body cylinder and piston - disc brake for uneven wear, damage or rust.
2. Check the rubber parts for damage or deterioration.
3. If faulty is found in the inspection, replace the relevant part.
Removal
EXTERIOR BODY PANELS > Door Sash TapeREMOVAL1. FRONT DOOR1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">2. Remove the trim panel - front door. Door Trim > REMOVAL">3. Remove the outer mirror assembly. Outer Mirror Ass ...
Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Subaru Select MonitorOPERATION• For detailed operation procedures, refer to “Application help”.• If the combination meter or MFD can not communicate with Subaru Select Monitor, perform the “Communication for Initializing Im ...
Front seatbelts
1. Adjust the seat position according to
the following procedure.
Driver's seat: Adjust the seatback to the
upright position. Move the seat as far from
the steering wheel as practical while still
maintaining full vehicle control.
Front passenger's seat: Adjust the seatback
to the upright ...