Subaru Crosstrek Owners Manual: Initialize
Items that have been set to your preference
can be initialized. To select an
initialization menu, operate the " 
" or " 
"
switch as follows.
Preparation for initialization
1. Turn the ignition switch to the "ON" position.
2. Push and hold the
button to show
the selection screen.
3. After the selection screen is displayed,
operate the " 
" or "
" switch to show the
"Initialize" item. Then, push the 
button.
Keyless access setting (models with "keyless access with pushbutton start
system")
Preparation for keyless access settings
1. Perform the preparation steps according
to "Preparation for car settings"
2. Operate the " " or "
" switch to
select the "Keyless Access Set ...
Reset to factory default settings
1. Perform the preparation steps according
to "Preparation for initialization"
2. Operate the " " or "
" switch to
select the "Reset to Defaults" item. Then
push the button.
...
Other materials:
Blind Spot Detection (BSD)
Operating range
The system warns the driver of dangers as
follows.
If the system detects vehicles in the
driver's blind spots, the BSD/RCTA approach
indicator light(s) on the outside
mirror(s) will illuminate.
If the driver operates the turn signal
lever to the side where th ...
Dtc p2750 intermediate shaft speed sensor "c" circuit range/performance
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2750 INTERMEDIATE SHAFT SPEED SENSOR "C" CIRCUIT RANGE/PERFORMANCEDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Shifting shock is felt.• ...
Inspection
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > Purge Control Solenoid ValveINSPECTION1. PURGE CONTROL SOLENOID VALVE1. Check that the purge control solenoid valve has no deformation, cracks or other damages.2. Measure the resistance between the purge control solenoid valve terminals.Ter ...