Subaru Crosstrek Owners Manual: Ignition switch light (if equipped)
For easy access to the ignition switch in the dark, the ignition switch light illuminates when the driver's door is opened or when the driver's door is unlocked using the remote keyless entry transmitter.
The light remains illuminated for several tens of seconds and then gradually turns off under the following conditions.
- when the driver's door is closed
- when the doors are unlocked using the remote keyless entry transmitter
The light turns off immediately under the following conditions.
- when the ignition switch is turned to the "ON" position
- when all doors and the rear gate are locked using the remote keyless entry transmitter
Key reminder chime
The reminder chime sounds when the
driver's door is opened and the ignition
switch is in the "LOCK" or "ACC" position.
The chime stops under the following
conditions.
when the ignition switc ...
Push-button ignition switch (models with push-button start system)
Safety precautions
Refer to "Safety precautions"2-10. ...
Other materials:
ECO gauge screen (if equipped)
Average fuel consumption corresponding
to the driving distance of each trip meter
ECO gauge
The gauge pointer shows the difference
between the current fuel consumption and
the average fuel consumption that is
displayed on the center part of the screen.
If the gauge pointer moves ...
Inspection
CONTROL SYSTEMS > AT Shift Lock Control SystemINSPECTION1. SHIFT LOCK OPERATION• Model without push button ignition switchSTEPCHECKYESNO1.CHECK COMMUNICATION OF SUBARU SELECT MONITOR.1) Turn the ignition switch to ON.2) Using the Subaru Select Monitor, check whether communication to all sys ...
Dtc b1434 evaporator temperature sensor circuit open
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1434 EVAPORATOR TEMPERATURE SENSOR CIRCUIT OPENDTC detecting condition:Evaporator sensor circuit is open.Trouble symptom:Evaporator temperature is falsely recognized as low, and the compartment temp ...
