Subaru Crosstrek Service Manual: Ignition switch illumination

Installation

LIGHTING SYSTEM > High-mounted Stop LightINSTALLATIONInstall each part in the reverse order of removal.Tightening torque:Light assembly - high-mounted: 4.5 N·m (0.46 kgf-m, 3.3 ft-lb) ...

Inspection

LIGHTING SYSTEM > Ignition Switch IlluminationINSPECTIONSTEPCHECKYESNO1.CHECK THE IGNITION SWITCH ILLUMINATION.Make sure the ignition switch illumination illuminates when driver’s side door i ...

Other materials:

Dtc b14eb intake door actuator stuck
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B14EB INTAKE DOOR ACTUATOR STUCKDTC detecting condition:• Intake door actuator is locked.• The potentiometer value of the actuator does not change.Trouble symptom:FRESH/RECIRC does not op ...

General diagnostic table Inspection
REAR SUSPENSION > General Diagnostic TableINSPECTION1. IMPROPER VEHICLE POSTURE OR IMPROPER WHEEL ARCH HEIGHTPossible causeCorrective action(1) Permanent distortion or damaged coil springReplace.(2) Rough operation of shock absorberReplace.(3) Installation of the wrong shock absorberReplace with ...

To arm the system using access key/remote transmitter
1. Close all windows and the moonroof (if equipped). 2. Remove the key from the ignition switch (models without "keyless access with push-button start system")/turn the push-button ignition switch to the "OFF" position (models with "keyless access with push-button start system"). 3. Open ...