Subaru Crosstrek Owners Manual: How to use SUBARU STARLINK

Subaru Crosstrek Owners Manual / Audio / Audio set / SUBARU STARLINK (if equipped) / How to use SUBARU STARLINK

1. Connect to the audio system. Use a USB port for an iPhone or iPod touch and Bluetooth for Android devices.

For details about connecting an iPhone/iPod touch: Refer to "Connecting and disconnecting a USB memory/ portable device"
For details about registering or connecting an Android device: Refer to "Registering/connecting Bluetooth device

2. Press the HOME button, and then touch the "APPS" key, or press the APPS button on the audio panel. The APPS screen is displayed.

How to use SUBARU STARLINK

3. Touch the "SUBARU STARLINK" key on the APPS screen. The disclaimer screen or the error screen is displayed.

4. Touch the "Check" key on the disclaimer screen and then the APPS main screen will appear. If you touch the "Cancel" key, the disclaimer screen disappears and the previous screen will be displayed again.

NOTE

The SUBARU STARLINK connection error screen will be displayed due to one of the following possible reasons.
Your smartphone and the system has not been connected via USB (for iPhone) or Bluetooth (for Android).
SUBARU STARLINK APPS has not been activated.
You can also switch to aha or Pandora (if equipped) from the APPS screen.

SUBARU STARLINK (if equipped)

The SUBARU STARLINK function allows the system to link with a smartphone using Bluetooth. ...

APPS main screen

Select to go to the Music APPS screen. Select to go to the News APPS screen. Select to go to the Calender APPS screen. Select to go to the iHeartRadio APPS screen. Select to go ...

Other materials:

Dtc b28a2 eyesight communication(vdc)
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28A2 EyeSight COMMUNICATION(VDC)Detected when the VDC control module (VDCCM) detects the malfunction of stereo camera.DTC DETECTING CONDITION:• Defective CAN system• Defective VDC control module (VDCC ...

Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Engine Wiring HarnessREMOVAL1. Release the fuel pressure. Fuel > PROCEDURE">2. Disconnect the ground cable from battery.3. Remove the intake manifold. Intake Manifold > REMOVAL">4. Disconnect the connector from the engine.• Struc ...

Diagnostics with phenomenon Inspection
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Diagnostics with PhenomenonINSPECTIONSymptomsMaintenance partsBSD/RCTA does not operate.FuseLAN system Basic Diagnostic Procedure">Body control system Basic Diagnostic Procedure">Radar sensor LHRadar sensor RHBSD/RCTA ...