1. Perform the preparation steps according to "Preparation for car settings"
2. Operate the " " or " " switch to select the "Hazard Warning Flasher" item.Then push the button.
3. The current setting will be displayed.
Push the button to enter the selection mode.
4. Select "On" or "Off" by operating the " " or " " switch. Then push the button.
5. Select "Set" by operating the " " switch, and confirm the setting by pushing the button.
6. The system will notify you that the setting is complete.
If the setting is not available, the following notification will be displayed. In this case, perform the setting procedure again.
Disassembly
INSTRUMENTATION/DRIVER INFO > Combination MeterDISASSEMBLYCAUTION:• Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.• Be careful not to apply excessive force to the trip knob.• Be sure not to touch the meter indicator needle.• Be ...
Before using aha application
In order to use the aha application on this
system, the application must be installed
on the smartphone.
Settings required to use aha
application
Search and download the aha application
from your smartphone app store.
iPhone and iPod touch: Apple App
Store via iTunes
Android device ...
Engine oil pressure Inspection
MECHANICAL(H4DO) > Engine Oil PressureINSPECTION1. Disconnect the ground cable from battery. NOTE">2. Remove the oil pressure switch. Oil Pressure Switch > REMOVAL">3. Install the oil pressure gauge to the chain cover.4. Connect the battery ground terminal. NOTE">5. ...