Subaru Crosstrek Service Manual: Glove box light

Preparation tool

LIGHTING SYSTEM > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for el ...

Inspection

LIGHTING SYSTEM > Glove Box LightINSPECTION1. Install the light to test if it illuminates normally.2. If it fails to illuminate normally, replace the light - pocket with a new part.NOTE:Since LED ( ...

Other materials:

Dtc b1795 occupant detection module internal circuit
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1795 OCCUPANT DETECTION MODULE INTERNAL CIRCUITDIAGNOSIS START CONDITION:Ignition voltage is 8 V to 16 V.DTC DETECTING CONDITION:Occupant detection control module is faulty.When “DTC B1795 ...

Installation
WIPER AND WASHER SYSTEMS > Rear WasherINSTALLATION1. Install each part in the reverse order of removal.Tightening torque:Light assembly - high-mounted: 4.5 N·m (0.46 kgf-m, 3.3 ft-lb)Roof spoiler assembly: 7.5 N·m (0.76 kgf-m, 5.5 ft-lb)2. Check the nozzle - rear washer position. R ...

Top tether anchorages
Your vehicle is equipped with three top tether anchorages so that a child restraint system having a top tether can be installed in the rear seat. When installing a child restraint system using top tether, proceed as follows, while observing the instructions by the child restraint system manuf ...