Touch the tab for the audio unit basic settings.
Item | Function |
System Language | Select to change the language |
Button Beeps | Select to set the sound beeps on/off. |
System Software | Select to update software versions.
This menu is not used in usual operation. |
Reset to Factory Setting | Select to reset the device to
factory settings. This menu is not
used in usual operation.
After resetting to factory settings, turn ignition off and on again. |
Dtc u0101 lost communication with tcm
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0101 LOST COMMUNICATION WITH TCMDetected when CAN data from TCM does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...
Component
VEHICLE DYNAMICS CONTROL (VDC) > General DescriptionCOMPONENT1. ABS WHEEL SPEED SENSOR(1)Front ABS wheel speed sensor(4)Rear ABS wheel speed sensorTightening torque: N·m (kgf-m, ft-lb)(2)Housing ASSY - front axle(5)Magnetic encoderT1:7.5 (0.8, 5.5)(3)Housing ASSY - rear axle(6)Hub unit COM ...
Installation
REAR SUSPENSION > Rear Lateral LinkINSTALLATIONCAUTION:• Be sure to use a new self-locking nut.• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.1. Before installation, inspect the following items and repla ...