LAN SYSTEM (DIAGNOSTICS) > General Diagnostic Table
INSPECTION
Item | Operation | Specifications | Note | |
YES | NO | |||
Diagnostic code | DTC is displayed when inspecting all DTCs. | Perform the diagnosis according to DTC. | System is normal. | — |
Speedometer | Faster vehicle speed than the actual speed is displayed. | VDC CM data may not be received. | System is normal. | Also, check vehicle speed pulse circuit. |
Fuel gauge | Fuel is present, but displayed less than actual amount. | Communication error may be present. | System is normal. | Also, check the fuel gauge. |
Fuel level warning light | Fuel is present, but the light illuminates. | Communication error may be present. | System is normal. | Also, check the fuel gauge. |
Engine coolant temperature light | Engine coolant temperature light blinks in red and blue alternately. | Communication error may be present. | System is normal. | Check the engine coolant light related items. |
[S], [I] or [S#] indicator | Blinking. | Communication error may be present. | System is normal. | Check the intelligent switch. |
VDC indicator | Illuminating. | Communication error may be present. | System is normal. | Check that VDC is not operating. |
VDC OFF indicator | Illuminating. | Communication error may be present. | System is normal. | Check that VDC is not OFF. |
Brake warning, etc. | Illuminating. | Brake fluid may be low in amount, or communication error may be present. | System is normal. | Check brake related items. |
Shift position | Not displayed. | Communication error may be present. | System is normal. | Also, check AT system. |
AT temperature light | Blinking. | Communication error may be present. | System is normal. | Also, check AT system. |
Door indicator | Not displayed. | Communication error may be present. | System is normal. | Check the door switch. |
Clearance indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
Hi beam indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
Front fog indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the combination switch. |
Illumination | Illuminating at the maximum brightness. | Communication error may be present. | System is normal. | Also, check the illumination switch. |
Cruise control indicator | Not illuminating. | Communication error may be present. | System is normal. | Check the cruise control system. |
AWD indicator | Not illuminating. | Communication error may be present. | System is normal. | Check TCM. |
Hill hold indicator | Not illuminating. | Communication error may be present. | System is normal. | Also, check VDC CM. |
General diagnostic table Inspection
WHEEL AND TIRE SYSTEM > General Diagnostic TableINSPECTIONSymptomsPossible causeCorrective actionWheel is out of balance.Improperly inflated tire.Adjust the tire pressure.Uneven wearCheck the tire referring to “Abnormal tire wear” in this table, carry out the procedure and replace the ...
Inspection
SECURITY AND LOCKS > Rear Gate Opener ButtonINSPECTIONPreparation tool:Circuit tester1. Check the resistance between switch terminals.Terminal No.Inspection conditionsStandardConnection diagram1 — 2OPENLess than 5 ?• Model without keyless access with push button start• Model with ke ...
Precautions against vehicle modification
Always consult your SUBARU dealer if
you want to install any accessory parts to
your vehicle.
CAUTION
Do not perform any of the following
modifications. Such modifications
can interfere with proper operation
of the seatbelt pretensioners.
Attachment of any equipment
(bush bar, winches, ...