Subaru Crosstrek Service Manual: General description
DIFFERENTIALS > Rear Differential Inspection Mode
GENERAL DESCRIPTION
CAUTION:
Be sure to perform rear differential inspection mode.
• Follow the messages displayed on the Subaru Select Monitor when working.
• “Rear differential inspection mode” using the Subaru Select Monitor is available only for the CVT model.
• Perform rear differential inspection mode when the following work has been performed.
Transmission assembly replacement/Replacement of rear differential/Replacement of front differential hypoid gear set/Replacement of rear differential hypoid gear set
Procedure
DIFFERENTIALS > Rear Differential Inspection ModePROCEDURECAUTION:Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.1. Shift the sele ...
Other materials:
List of cancel code List
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > List of Cancel CodeLISTCodeItemContents of diagnosisB2320Rear RADAR Low Voltage (less than 9V)Temporarily stops because the voltage supplied to radar drops below 9 V. Returns to normal when the voltage becomes normal.B2321Rear RADAR Hi ...
Road test Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Road TestINSPECTION1. GENERAL PRECAUTIONRoad tests should be conducted to properly diagnose the condition of CVT.CAUTION:Always observe the local traffic laws when performing the test.2. D RANGE SHIFT FUNCTIONMake sure that the engine speed is 1,100 — ...
Rear seatbelts (except rear center seatbelt)
1. Sit well back in the seat.
2. Pick up the tongue plate and pull the
belt out slowly. Do not let it get twisted.
If the belt stops before reaching the
buckle, return the belt slightly and pull
it out more slowly.
If the belt still cannot be unlocked,
let the belt retract slightly a ...
