Subaru Crosstrek Service Manual: General description
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching Mode
GENERAL DESCRIPTION
• Follow the messages displayed on the Subaru Select Monitor when working.
• Perform as necessary in FWD mode.
• When switched to FWD, AWD light illuminates.
Procedure
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > AWD ON/OFF Switching ModePROCEDURECAUTION:• Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link ...
Other materials:
Fuel gauge
Fuel gauge (type A)
Trip knob
Fuel gauge (type B)
Trip knob (U.S.-spec. models)
Trip knob (except U.S.-spec. models)
The fuel gauge is displayed when the
ignition is in the "ON" position, and it
shows the approximate amount of fuel
remaining in the tank.
The gauge indic ...
Dtc c1232 rear right abs sensor signal
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1232 REAR RIGHT ABS SENSOR SIGNALNOTE:For the diagnostic procedure, refer to “DTC C1242 REAR LEFT ABS SENSOR SIGNAL”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > ...
System maintenance
NOTE
For the Subaru Ascent remote engine starter transceiver: if the vehicle battery
has been replaced, discharged, or disconnected, it is necessary to start the vehicle
manually at least once using the key or ignition system before the remote engine
start function can be used again. This ste ...
