Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: General description

CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Learning Control

GENERAL DESCRIPTION

Follow the messages displayed on the Subaru Select Monitor when working.

When the following work is performed, perform learning work for the transmission.

Replacement of TCM/Replacement or disassembly of transmission assembly/Replacement of control valve body/Clearing AT leaning value is executed.

Procedure
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Learning ControlPROCEDURE1. PREPARATION FOR LEARNING1. Warm up or cool down until the ATF temperature displayed on the Subaru Select Monitor is 40 ...

Transmission control module (tcm) i/o signal
...

Other materials:

Dtc b1574 key communication
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1574 KEY COMMUNICATIONDTC DETECTING CONDITION:Communication failure between key and body integrated unitCAUTION:When the body integrated unit is replaced, registration of the immobilizer system is required. Fo ...

Screen Settings
After entering the "Screen Settings" menu, select one of the following menus. Welcome Good-bye Screen The welcome screen/good-bye screens can be activated or deactivated. Select "On" to activate the screens. Select "Off" to deactivate the screens. Gauge Initial Movement The movement of the m ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transmission Mounting SystemINSTALLATION1. PITCHING STOPPER1. Install the pitching stopper.Tightening torque:T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)T2: 58 N·m (5.9 kgf-m, 42.8 ft-lb)2. Install the air intake boot assembly. Air Intake Boot > ...

© 2016-2022 Copyright www.sucross.com