Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Function settings

A SUBARU dealer can change the settings of the functions shown in the following table to meet your personal requirements. Contact the nearest SUBARU dealer for details. If your vehicle is equipped with a multi function display, the settings for some of these functions can be changed using the display. For details, refer to "Multi function display" 3-42.

Item Function Possible settings Default setting
Alarm system Alarm system Operation/Non-operation Operation
Monitoring start delay time (after closure of doors) 0 seconds/30 seconds 30 seconds
Impact sensor operation (only models with shock sensors (dealer option)) Operation/Non-operation Non-operation
Passive arming (models without "Keyless Access with Push-button Start system") Operation/Non-operation Non-operation
Dome light and map lights illumination (models with moonroof) ON/OFF OFF
Dome light illumination (models without moonroof)
Keyless Access (if equipped) Hazard warning flasher Operation/Non-operation Operation
Audible signal Operation/Non-operation Operation
Audible signal volume Level 1 to 7 Level 5
Door unlock selection function (driver's door unlock) Driver's door only/All doors Driver's door only
Door unlock selection function (rear gate unlock) Rear gate only/All doors Rear gate only
Remote keyless entry system Hazard warning flasher Operation/Non-operation Operation
Audible signal Operation/Non-operation Operation
Audible signal volume Level 1 to 7 Level 5
Key lock-in prevention Key lock-in prevention Operation/Non-operation Operation
Defogger and deicer system for models with the automatic climate control system Rear window defogger, outside mirror defogger and windshield wiper deicer Operation for 15 minutes/ Continuous operation Operation for 15 minutes
Dome light Operation of dome light/map light/ cargo area light OFF delay timer OFF/10 seconds/20 seconds/30 seconds 30 seconds
Map light for models with a moonroof
Cargo area light
Battery drainage prevention function Battery drainage prevention function Operation/Non-operation Operation
Seatbelt warning Sounds a chime while driving Operation/Non-operation Operation
Auto on/off headlights (if equipped) Sensitivity of the operation of the auto on/off headlights Low/Mid/High/Max Mid
Welcome lighting function (if equipped) Welcome lighting function (when approaching) OFF/30 seconds/60 seconds/90 seconds 30 seconds
Welcome lighting function (when exiting) OFF/30 seconds/60 seconds/90 seconds 30 seconds
Reverse gear interlocked rear wiper Reverse gear interlocked rear wiper operation Operation/Non-operation U.S.-spec. models: Non-operation Other models: Operation
One-touch lane changer Operation of the one-touch lane changer Operation/Non-operation Operation
Warning and indicator lights
Mark Name Seatbelt warning light Front passenger's seatbelt warning light SRS airbag system warning light Front pass ...

Seat, seatbelt and SRS airbags
...

Other materials:

Activation of malfunction indicator light
ENGINE (DIAGNOSTICS)(H4DO) > Malfunction Indicator LightACTIVATION OF MALFUNCTION INDICATOR LIGHT1. When the ignition switch is turned to ON (engine OFF), the malfunction indicator light (A) in the combination meter illuminates.NOTE:If the malfunction indicator light does not illuminate, perform ...

Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Reverse Check SleeveINSTALLATION1. Install the reverse check sleeve.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the reverse check ball, reverse accent spring, gasket and plug.NOTE:Use a new gasket.Tightening torque:9.75 N·m ...

Select play mode
The play mode settings display will appear when play mode key is touched. Select the preferred play mode from the following items. Icon Function Touch to start 1 track repeat. Touch to start repeat all. Touch to repeat the tracks in the group. ...

© 2016-2024 Copyright www.sucross.com