WIRING SYSTEM > Front Wiring Harness
LOCATION
Connector | Connecting to | ||||
No. | Pole | Color | Area | No. | Description |
F5 | 1 | Black | C-1 | Horn | |
F6 | 2 | C-1 | Front fog light RH (without SRF) | ||
2 | Black | C-1 | Front fog light RH (with SRF) | ||
F16 | 2 | C-1 | Sub fan motor | ||
F17 | 2 | D-2 | Main fan motor | ||
F21 | 2 | D-4 | Front fog light LH (without SRF) | ||
2 | Black | D-4 | Front fog light LH (with SRF) | ||
F24 | 1 | B-3 | Magnet clutch | ||
F25 | 1 | B-2 | Generator terminal B | ||
F26 | 3 | B-2 | Generator | ||
F27 | 26 | B-5 | Relay holder | ||
F35 | 12 | Blue | B-5 | M/B | |
F36 | 7 | B-5 | |||
F37 | 20 | B-5 | |||
F47 | 1 | Black | C-2 | Horn | |
F78 | 2 | Black | C-2 | Ambient sensor | |
F103 | 2 | Gray | C-1 | Daytime running light resistor | |
F108 | 18 | Gray | B-5 | B361 | Through joint connector |
F109 | 24 | B-4 | B360 | ||
F125 | 8 | Light gray | C-4 | Front combination light LH | |
F126 | 8 | Light gray | B-1 | Front combination light RH | |
F148 | 2 | C-3 | High beam LH | ||
F149 | 2 | B-1 | High beam RH | ||
: White or natural color |
Using the cover
To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To
rewind it, unhook it from the catches and
it will rewind automatically. You should
hold on to the cover and guide it back into
the cover housing while it is rewinding.
WA ...
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearDISASSEMBLY1. Remove the ball bearing using ST.ST1 498077400BEARING REMOVERST2 899864100REMOVER ...
Removal
BRAKE > Brake HoseREMOVAL1. FRONT BRAKE HOSE1. Disconnect the brake pipe (b) from the brake hose (a).Preparation tool:Flare nut wrench2. Remove the clamp, strut mounting bolt and union bolt, and remove the front brake hose.2. REAR BRAKE HOSE1. Remove the brake hose bracket bolt and union bolt.2. ...