Subaru Crosstrek Service Manual: Front turn signal light bulb

Installation

LIGHTING SYSTEM > Front Side Marker Light BulbINSTALLATIONInstall each part in the reverse order of removal. ...

Inspection

LIGHTING SYSTEM > Front Turn Signal Light BulbINSPECTION1. Visually check the bulb for blow out.2. Check the bulb specification. General Description > SPECIFICATION">3. Replace the bulb ...

Other materials:

Removal
BRAKE > Rear Brake PadREMOVAL1. Lift up the vehicle, and then remove the rear wheels.2. Remove the rear brake pad.(1) Remove the bolts and remove the brake hose bracket.(2) Remove the caliper bolt, and raise and hold the caliper body assembly.NOTE:Do not disconnect the brake hose from the caliper ...

Inspection
LIGHTING SYSTEM > Hazard SwitchINSPECTION1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard2 — 3Switch OFF1 M? or moreSwitch ONLess than 1 ?2. Apply battery voltage between the connector terminals to check the lighting ...

Dtc b1012 battery backup power supply
BODY CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1012 BATTERY BACKUP POWER SUPPLYDTC detecting condition:Voltage failure caused by poor contact of battery power supply backup circuitsTrouble symptom:Illuminations for the keyless entry, map light, lug ...