Subaru Crosstrek Service Manual: Engine oil pressure Inspection
MECHANICAL(H4DO) > Engine Oil Pressure
INSPECTION
1. Disconnect the ground cable from battery. NOTE">
2. Remove the oil pressure switch. Oil Pressure Switch > REMOVAL">
3. Install the oil pressure gauge to the chain cover.
4. Connect the battery ground terminal. NOTE">
5. Start the engine, and check the oil pressure.
NOTE:
• Standard value is based on an engine oil temperature of 80°C (176°F).
• If the oil pressure is out of specification, check oil pump, oil filter and lubrication line. Engine Lubrication System Trouble in General > INSPECTION">
• If the oil pressure warning light is ON and oil pressure is within standard, check the oil pressure switch. Engine Lubrication System Trouble in General > INSPECTION">
Engine oil pressure:
Standard
50 kPa (0.5 kg/cm2, 7 psi) or more (at 600 r/min)
350 kPa (3.6 kg/cm2, 51 psi) or more (at 6,000 r/min)
6. After inspection, install the related parts in the reverse order of removal.
Engine noise Inspection
MECHANICAL(H4DO) > Engine NoiseINSPECTIONType of soundConditionPossible causeRegular clicking soundSound increases as engine speed increases.• Valve mechanism is defective• Incorrect ca ...
Engine trouble in general Inspection
MECHANICAL(H4DO) > Engine Trouble in GeneralINSPECTIONNOTE:The “RANK” shown in the chart shows the possibilities of the cause of trouble in order from “Very often” to &ldquo ...
Other materials:
Disassembly
REAR SUSPENSION > Rear Shock AbsorberDISASSEMBLY1. Using a coil spring compressor, compress the coil spring.2. Using a hexagon wrench to prevent the shock absorber piston rod from turning, remove the self-locking nut with ST.CAUTION:When installing the coil spring compressor to the coil spring, f ...
ECO gauge screen (if equipped)
Average fuel consumption corresponding
to the driving distance of each trip meter
ECO gauge
The gauge pointer shows the difference
between the current fuel consumption and
the average fuel consumption that is
displayed on the center part of the screen.
If the gauge pointer moves ...
List
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Read Current DataLISTItems to be displayedUnit of measureContentsNoteIn-vehicle Sensor Temperature°C (°F)A/C control panel input value — Quantity of SunloadW/m2A/C control panel input value — Air conditioner pressure SWON/OFFA/C con ...
