Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Electrical specification

TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Control Module I/O Signal

ELECTRICAL SPECIFICATION

Terminal No.

Content

Measured value and measuring conditions

Remarks

1

2

3

4

Ignition power supply

10 — 13 V (when the ignition switch is ON)

5

GND

0 V (always)

6

Battery power supply

10 — 13 V (always)

7

8

9

10

11

Body integrated unit

12

Control module i/o signal
...

Wiring diagram
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Control Module I/O SignalWIRING DIAGRAMRefer to “Tire Pressure Monitoring System” in the wiring diagram. Tire Pressure Monitoring System ...

Other materials:

Replacement
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Differential Gear OilREPLACEMENTCAUTION:• Immediately after the vehicle has been running or after idling for a long time, the differential gear oil will be hot. Be careful not to burn yourself.• Be careful not to spill differential gear oil ...

Basic information before use
WARNING When the vehicle is stopped with the engine running, always apply the parking brake for safety. Failure to do so may result in loss of control of your vehicle and cause an accident or serious injury. CAUTION To prevent damaging the screen, touch the screen keys with your finge ...

Installation
CLUTCH SYSTEM > Clutch PedalINSTALLATION1. Install in the reverse order of removal.CAUTION:Always use a new clevis pin.Tightening torque:Clutch pedal18 N·m (1.8 kgf-m, 13.3 ft-lb)Knee airbag module7.5 N·m (0.76 kgf-m, 5.5 ft-lb)Air intake boot3 N·m (0.3 kgf-m, 2.2 ft-lb)2. Ad ...

© 2016-2024 Copyright www.sucross.com