Subaru Crosstrek Service Manual: Electrical component location Location
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Electrical Component Location
LOCATION
(1) | VDC control module and hydraulic control unit (VDCCM&H/U) | (7) | VDC OFF indicator light | (12) | ABS wheel speed sensor |
(2) | Connector | (8) | Steering angle sensor | (13) | Engine control module (ECM) |
(3) | VDC OFF switch | (9) | Transmission control module (TCM) | (14) | Stop light switch |
(4) | ABS warning light | (10) | Data link connector | (15) | Hill start assist OFF indicator light / Hill start assist warning light |
(5) | Brake warning light (EBD warning light) | (11) | Magnetic encoder | (16) | Hybrid powertrain control module (HPCM) |
(6) | VDC warning light & VDC indicator light |
• Models without EyeSight
• Models with EyeSight
Clear memory mode Operation
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and select ...
General diagnostic table Inspection
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > General Diagnostic TableINSPECTIONSymptomsMain probable causeOther probable causePoor brake performanceLong braking/stopping distance• VDCCM& ...
Other materials:
Installation
MECHANICAL(H4DO) > Timing Chain AssemblyINSTALLATION1. TIMING CHAIN LHNOTE:• Be careful that the foreign matter is not into or onto the assembled component during installation.• Apply engine oil to all component parts of the timing chain.1. Prepare to attach the chain tensioner LH.(1) ...
To arm the system using the keyless access function (if equipped)
1. Close all windows and the moonroof (if
equipped)
2. Turn the push-button ignition switch to
the "OFF" position.
3. Open the doors and get out of the
vehicle.
4. Make sure that the engine hood is
locked.
5. Close all doors and the rear gate.
Door lock sensor
Security i ...
Dtc p0453 evap system (cpc) pressure sensor/switch circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0453 EVAP SYSTEM (CPC) PRESSURE SENSOR/SWITCH CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mod ...
