Subaru Crosstrek Service Manual: Electrical component location Location
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Electrical Component Location
LOCATION
(1) | Steering gearbox | (3) | STEERING warning light | (5) | VDCCM&H/U |
(2) | Power steering control module | (4) | Engine control module (ECM) | (6) | Data link connector (for Subaru Select Monitor) |
• U5 and U6 models
• C0 model
Clear memory mode Operation
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Clear Memory ModeOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the vehicle information and ...
Inspection mode Procedure
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Inspection ModePROCEDUREReproduce the malfunction occurrence condition as much as possible. ...
Other materials:
Assembly
FRONT SUSPENSION > Front StrutASSEMBLY1. Before assembly, check each part. Front Strut > INSPECTION">2. Using a coil spring compressor, compress the coil spring - front.CAUTION:When installing the coil spring compressor to the coil spring, follow the operation manual accompanied with ...
Dtc u0423 invalid data received from instrument panel cluster control module
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULEThis is detected when CAN data from meter is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure &g ...
Disassembly
CLUTCH SYSTEM > Operating CylinderDISASSEMBLY1. Remove the boot and push rod.2. Apply compressed air through clutch hose attachment hole.NOTE:Face the piston hole down and place a piece of wood underneath to prevent the piston from popping out.3. Separate the piston and piston spring. ...
