Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Electrical component location Location

OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Electrical Component Location

LOCATION

(1)

Occupant detection control module

(3)

Airbag ON/OFF indicator light

(4)

Buckle switch (passenger’s seat)

(2)

Occupant detection sensor

Clear memory mode Operation
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Clear Memory ModeOPERATIONAfter repairing the occupant detection system, clear the DTCs stored in the airbag control module and the occupant detection cont ...

Inspection mode Procedure
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Inspection ModePROCEDURERecreate the circumstance by referring to the conditions described in the checklist. ...

Other materials:

Basic diagnostic procedure Procedure
LAN SYSTEM (DIAGNOSTICS) > Basic Diagnostic ProcedurePROCEDURECAUTION:• Subaru Select Monitor is required for reading DTC, performing diagnosis, reading current data, customizing and active test (compulsory drive).• Remove foreign matter (dust, water, oil, etc.) from each control modu ...

Diagnostic procedure for subaru select monitor communication Communication for initializing impossible
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostic Procedure for Subaru Select Monitor CommunicationCOMMUNICATION FOR INITIALIZING IMPOSSIBLEDiagnosis:Defective CAN communication circuitTrouble symptom:• LAN system is abnormal.• Communication failure between Subaru Select Monitor and A ...

Driving tips
Do not drive with your foot resting on the clutch pedal and do not use the clutch to hold your vehicle at a standstill on an upgrade. Either of those actions may cause clutch damage. Do not drive with your hand resting on the shift lever. This may cause wear on the transmission components. ...

© 2016-2024 Copyright www.sucross.com