Subaru Crosstrek Service Manual: Electrical component location Location
BODY CONTROL SYSTEM (DIAGNOSTICS) > Electrical Component Location
LOCATION
(1) | Body integrated unit | (2) | Data link connector |
Control module i/o signal Electrical specification
BODY CONTROL SYSTEM (DIAGNOSTICS) > Control Module I/O SignalELECTRICAL SPECIFICATIONDescriptionTerminal No.Signal (V or ?)NoteIgnition switch ON(Engine OFF)Ignition power supply (rear wiper)A5 &la ...
Function check Operation
BODY CONTROL SYSTEM (DIAGNOSTICS) > Function CheckOPERATIONNOTE:In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor withou ...
Other materials:
Inspection
BRAKE > Front Disc RotorINSPECTION1. DISC ROTOR RUNOUT CHECK1. Check the hub unit COMPL - front axle for free play and runout before the inspection of disc rotor runout limit. Front Hub Unit Bearing > INSPECTION">2. Tighten the wheel nuts to secure disc rotor.3. Set a dial gauge 10 mm ...
Preparation tool
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Mo ...
Dtc c1322 fl pressure reducing valve
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1322 FL PRESSURE REDUCING VALVENOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C ...
