SPECIFICATIONS > Crosstrek
ELECTRICAL
Model | 2.0 L DOHC non-turbo | |||
Ignition timing (at idling) | BTDC | MT: 12°±10° CVT: 16°±10° | ||
Spark plug | Type and manufacturer | NGK: SILZKAR7B11 | ||
Generator | 12 V — 130 A | |||
Battery | Type | 55D23L | 75D23L | |
Nominal capacity | 5 HR: 40 Ah [25°C (77°F)] | 5 HR: 53 Ah [25°C (77°F)] | ||
Nominal voltage | 12 V | |||
CCA | 390 A | 470 A |
Refrigerant charging procedure Procedure
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Charging ProcedurePROCEDURECAUTION:• While working, be sure to wear protective goggles and protective gloves.• Air in the cycle can cause insufficient air conditioning, and water in the cycle can cause clogging in the cycle (icing ...
Safety precautions
WARNING
Bulbs may become very hot while
illuminated. Before replacing
bulbs, turn off the lights and wait
until the bulbs cool down. Otherwise,
there is a risk of sustaining
a burn injury.
For models with HID low beam
headlights, observe the following
precautions. Not doing so carries
the ...
Removal
VEHICLE DYNAMICS CONTROL (VDC) > VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)REMOVAL1. MODELS WITHOUT EyeSight1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake boot. Air Intake Boot > REMOVAL">CAUTION:Move aside the intake boot to pe ...