Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: ECO history screen

ECO history screen

  1. Average fuel consumption per unit time (bar graph)
  2. Average fuel consumption corresponding to the driving distance of each trip meter (red line)

This screen displays the fuel economy history for the vehicle using a bar graph.

The horizontal scale represents the past time range and the vertical scale represents the fuel consumption. The green bars show driving with good fuel economy and the yellow bars show driving with poor fuel economy.

The time range of the history can be set.

The width of the bar graph is adjusted as follows depending on the set time range.

Time range Width of bar graph
30 minutes 1 minute
60 minutes 2 minutes
120 minutes 4 minutes

For details about the setting, refer to "Economy history setting"

ECO gauge screen (if equipped)
Average fuel consumption corresponding to the driving distance of each trip meter ECO gauge The gauge pointer shows the difference between the current fuel consumption and the average ...

Vehicle activation status screen
When the vehicle stops 1) Steering axle When the vehicle is being driven regularly 1) Power train (illuminated in blue) When the Vehicle Dynamics Control system is being activated: the ...

Other materials:

Ignition timing Inspection
MECHANICAL(H4DO) > Ignition TimingINSPECTIONCAUTION:After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.1. Before checking the ignition timing, check the following item:(1) Check the air cleaner element is free from clogging, spark plugs are in good condition ...

Dtc b2790 id code box circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2790 ID CODE BOX CIRCUITDTC detecting condition:An error has occurred inside the ID code box.Trouble symptom:Engine will not start.CAUTION:For replacement procedure of ID code ...

Installation
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyINSTALLATION1. Remove the front differential assembly.2. Hypoid gear set match mark/No.: The number (A) on top of the drive pinion, and the number on the hypoid driven gear are set numbers for the two gears. Use a pair having ...

© 2016-2022 Copyright www.sucross.com