INSTRUMENTATION/DRIVER INFO > ECO Gauge
SPECIFICATION
Since the meter - main assembly cannot be disassembled, do not remove or inspect the ECO gauge alone. (Do not remove the cover on the back surface.)
System temporary stop indicator due to reduced radar sensitivity
System temporary stop indicator due to reduced radar sensitivity
This indicator appears when the detectability
of the radar sensors is reduced.
Once the condition is corrected, the
system will recover from the temporary
stop condition and the indicator will
disappear.
If the indicator ...
Inspection
POWER ASSISTED SYSTEM (POWER STEERING) > Electric Power Steering GearboxINSPECTION1. UNIT INSPECTIONCheck components for wear, damage or other faults. Adjust or replace if necessary.2. LIMITMake a measurements as follows. If it exceeds the specified service limits, adjust or replace.NOTE:When fix ...
Inspection
CLUTCH SYSTEM > Clutch Disc and CoverINSPECTION1. CLUTCH DISC1. Facing wearMeasure the depth from the facing surface to the rivet head. Replace if the face is worn locally or worn down to less than the specified value.Depth to rivet head:Limit of sinking0.8 mm (0.031 in)NOTE:Do not wash the clutc ...