LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE
DTC DETECTING CONDITION:
Defective data was transmitted from A/C control panel.
TROUBLE SYMPTOM:
Cooperation control of air conditioner does not operate properly.
STEP | CHECK | YES | NO |
1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.
Was the basic diagnostic procedure performed up to STEP 3?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 2.
Perform the basic diagnostic procedure. Basic Diagnostic Procedure">
2.CHECK DTC.
Check the displayed DTC.
Are DTCs other than U*** displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 3.
3.CHECK DTC.
Check the displayed DTC.
Is DTC for the bus off or the data no-receive displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 4.
4.CHECK DTC.
Check the displayed DTC.
Is U0424 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 5.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 9.
5.CHECK DTC.
1) Turn the ignition switch to OFF.
2) Disconnect the A/C control panel connector.
3) Connect the disconnected connectors.
4) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0424 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 6.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 9.
6.CHECK DTC.
Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">
Is the air conditioner data abnormal detected in several modules?
Replace the A/C control panel. Control Panel">
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 7.
7.REPLACE MODULE.
1) Replace the A/C control panel.
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0424 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 8.
System is normal.
8.CHECK MODULE.
1) Restore the A/C control panel.
2) Replace the module that the DTC has been detected.
3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0424 a current malfunction?
Replace the A/C control panel. Control Panel">
System is normal.
9.CHECK HARNESS.
1) Shake the harness, and check for poor contact.
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0424 a current malfunction?
Repair the poor contact of harness, or replace the harness.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0424 INVALID DATA RECEIVED FROM HVAC CONTROL MODULE">Go to Step 10.
10.CHECK CONNECTOR.
Check the connector used for high speed CAN for poor contact.
Is there poor contact of connector?
Repair the connector that has poor contact, or replace harness.
It is possible that temporary poor communication occurs. Delete the DTC.
System features
In the event of wheelspin and/or skidding
on a slippery road surface and/or during
cornering and/or an evasive maneuver,
the Vehicle Dynamics Control system
adjusts the engine's output and the
wheels' respective braking forces to help
maintain traction and directional control.
Traction Con ...
Dtc c0032 fr pressure reducing valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0032 FR PRESSURE REDUCING VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Troub ...
Inspection
WIPER AND WASHER SYSTEMS > Combination Switch (Wiper)INSPECTION1. INSPECTION OF SWITCH UNIT1. Operate the switches to check the continuity between terminals. Switch positionTerminal No.StandardFrontOFFA1 and A3Less than 1 ?INTA1 and A3Less than 1 ?LOA2 and A3Less than 1 ?HIA2 and A4Less than 1 ?W ...