ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULE
NOTE:
For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure">
1. OUTLINE OF DIAGNOSIS
Detect malfunction of CAN communication.
Judge as NG when data received from TCM, VDC CM and combination meter is not normal.
2. COMPONENT DESCRIPTION
(Common Specifications)
CAN Protocol 2.0 B (Active)
Frame Format: 11 Bit ID Frame (Standard Frame)
Conforms to ISO11898
Communication Speed: 500 kbps
3. EXECUTION CONDITION
Secondary Parameters | Execution condition |
Battery voltage | ≥ 10.9 V |
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously after starting the engine.
5. DIAGNOSTIC METHOD
Judge as NG when the following conditions are established.
Malfunction Criteria | Threshold Value |
CAN data from instrument panel cluster control module | Did not change |
Time Needed for Diagnosis: 2 seconds
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Component
WIPER AND WASHER SYSTEMS > General DescriptionCOMPONENT1. FRONT WIPER• Models without EyeSight(1)Motor ASSY - windshield wiper(6)Rubber ASSY - windshield wiper driverTightening torque: N·m (kgf-m, ft-lb)(2)Link ASSY - windshield wiper(7)Arm ASSY - windshield wiper assistorT1:5.5 (0.5 ...
Dtc b1571 reference code incompatibility (immobilizer cm to ecm)
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1571 REFERENCE CODE INCOMPATIBILITY (IMMOBILIZER CM TO ECM)DTC detecting condition:Incompatibility of reference code between keyless access CM (model without ID code box) or ID ...
Removal
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Pump RelayREMOVAL1. Disconnect the ground cable from battery.2. Remove the glove box. Glove Box > REMOVAL">3. Remove the fuel pump relay from relay block. ...