Subaru Crosstrek Service Manual: Dtc u0420 invalid data received from power steering control module

DTC DETECTING CONDITION:

Defective data was transmitted from EPS CM.

TROUBLE SYMPTOM:

Cooperation control with EPS CM does not operate properly.

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 3?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 2.

Perform the basic diagnostic procedure. Basic Diagnostic Procedure">

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed?

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 3.

3.CHECK DTC.

Check the displayed DTC.

Is DTC for the bus off or the data no-receive displayed?

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 4.

4.CHECK DTC.

Check the displayed DTC.

Is U0420 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 5.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 9.

5.CHECK DTC.

1) Turn the ignition switch to OFF.

2) Disconnect the power steering CM connector.

3) Connect the disconnected connectors.

4) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0420 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 6.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 9.

6.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">

Is the electric power steering data abnormal detected in several modules?

Replace the power steering CM. Power Steering Control Module">

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 7.

7.REPLACE MODULE.

1) Replace the power steering CM.

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0420 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 8.

System is normal.

8.CHECK MODULE.

1) Reinstall the power steering CM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0420 a current malfunction?

Replace the power steering CM. Power Steering Control Module">

System is normal.

9.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Using the Subaru Select Monitor, read DTC of CAN system. Read Diagnostic Trouble Code (DTC)">

Is U0420 a current malfunction?

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0420 INVALID DATA RECEIVED FROM POWER STEERING CONTROL MODULE">Go to Step 10.

10.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector?

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0416 invalid data received from vehicle dynamics control module

Dtc u0422 invalid data received from body control module

Other materials:

Dtc b1577 imm control module eeprom
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1577 IMM CONTROL MODULE EEPROM1. EXCEPT FOR C0 AND C5 MODELSDTC detecting condition:• Defective keyless access CM• When inaccessible to ROM in keyless access CM.STE ...

Disassembly
BRAKE > Front Disc Brake AssemblyDISASSEMBLYCAUTION:Be careful not to allow foreign matter to enter the brake hose connector.1. Remove mud and foreign matter from the caliper body.2. Remove the piston - disc brake.(1) Place a wooden block in the caliper body as shown in the figure to prevent the ...

Using the phone switch/microphone
Steering switch By pressing the steering switch, a call can be received or ended without taking your hands off the steering wheel. Volume control switch Off hook switch On hook switch Microphone The microphone is used when talking on the phone. Type A Type B How ...