LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0402 INVALID DATA RECEIVED FROM TCM
DTC detecting condition:
Received error data from TCM.
Trouble symptom:
Sport indicator light blinks.
STEP | CHECK | YES | NO |
1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.
Was the basic diagnostic procedure performed up to STEP 3?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 2.
Perform the basic diagnostic procedure. Basic Diagnostic Procedure">
2.CHECK DTC.
Check the displayed DTC.
Are DTCs other than U*** displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 3.
3.CHECK DTC.
Check the displayed DTC.
Is DTC for the bus off or the data no-receive displayed?
Perform the diagnosis according to DTC.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 4.
4.CHECK DTC.
Check the displayed DTC.
Is U0402 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 5.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 9.
5.CHECK DTC.
1) Turn the ignition switch to OFF.
2) Disconnect the TCM connector.
3) Connect the disconnected connectors.
4) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0402 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 6.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 9.
6.CHECK DTC.
Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">
Is the transmission data abnormal detected in several modules?
Replace the TCM. Transmission Control Module (TCM)">
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 7.
7.REPLACE MODULE.
1) Replace the TCM.
2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0402 a current malfunction?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 8.
System is normal.
8.CHECK MODULE.
1) Reinstall the TCM.
2) Replace the module that the DTC has been detected.
3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">
Is U0402 a current malfunction?
Replace the TCM. Transmission Control Module (TCM)">
System is normal.
9.CHECK HARNESS.
1) Shake the harness, and check for poor contact.
2) Using the Subaru Select Monitor, read DTC of CAN system. Read Diagnostic Trouble Code (DTC)">
Is U0402 a current malfunction?
Repair the poor contact of harness, or replace the harness.
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM">Go to Step 10.
10.CHECK CONNECTOR.
Check the connector used for high speed CAN for poor contact.
Is there poor contact of connector?
Repair the connector that has poor contact, or replace harness.
It is possible that temporary poor communication occurs. Delete the DTC.
Disassembly
MECHANICAL(H4DO) > Cam CarrierDISASSEMBLY1. CAM CARRIER RH1. Loosen the bolts (front camshaft cap RH, intake center camshaft cap RH, intake rear camshaft cap RH, exhaust center camshaft cap RH, and exhaust rear camshaft cap RH) equally, a little at a time in numerical sequence as shown in the fig ...
Before driving
Make certain that you and all of your
passengers are wearing seatbelts.
Carry some emergency equipment,
such as a towing rope or chain, a shovel,
wheel blocks, first aid kit and cell phone or
citizens band radio.
Secure all cargo carried inside the
vehicle and make certain that it i ...
Information display (if equipped)
NOTE
For models with color multi function
display, refer to "Multi function display"
Outside temperature indicator
Driving information display
Clock
With the ignition switch in the "ACC"
position, the clock appears on the display.
With the ignition switch in the "ON"
position, ...