Subaru Crosstrek Service Manual: Dtc u0131 lost communication with power steering control module

DTC DETECTING CONDITION:

No data is received from power steering CM.

TROUBLE SYMPTOM:

Cooperation control with power steering CM does not operate properly.

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 3?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 2.

Perform the basic diagnostic procedure. Basic Diagnostic Procedure">

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed?

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 3.

3.CHECK DTC.

Check the displayed DTC.

Is U0131 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 4.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 8.

4.CHECK DTC.

1) Check CAN communication circuit. CAN Communication Circuit Check">

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0131 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 5.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 8.

5.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems. Read Diagnostic Trouble Code (DTC)">

Is the electric power steering data no-receive detected in several modules?

Replace the power steering CM. Power Steering Control Module">

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 6.

6.REPLACE MODULE.

1) Replace the power steering CM.

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0131 a current malfunction?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 7.

System is normal.

7.CHECK MODULE.

1) Reinstall the power steering CM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0131 a current malfunction?

Replace the power steering CM. Power Steering Control Module">

System is normal.

8.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Read the DTC using Subaru Select Monitor. Read Diagnostic Trouble Code (DTC)">

Is U0131 a current malfunction?

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE">Go to Step 9.

9.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector?

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0126 lost communication with steering angle sensor module

Dtc u0140 lost communication with body control module

Other materials:

Electrical component location Location
EyeSight (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Stereo camera(5)EyeSight steering switch(9)Transmission control module (TCM)(2)VDC control module (VDCCM)(6)MFD (multi-function display)(10)Stop light and brake switch(3)Brake light relay(7)Body integrated unit(11)ECM(4)Combination ...

Dtc p0365 camshaft position sensor "b" circuit bank 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0365 CAMSHAFT POSITION SENSOR "B" CIRCUIT BANK 1DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Engine stall• Failure of engine to startCAUTION:After servicing ...

Low tire pressure warning light (U.S.-spec. models)
When the ignition switch is turned to the "ON" position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TPMS) is functioning properly. If there is no problem and all tires are properly inflated, the light w ...