VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0100 LOST COMMUNICATION WITH ECM/PCM “A”
NOTE:
Refer to “LAN SYSTEM” for diagnostic procedure. Basic Diagnostic Procedure">
Check power supply and ground line of engine control module (ecm)
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostics for Engine Starting FailureCHECK POWER SUPPLY AND GROUND LINE OF ENGINE CONTROL MODULE (ECM)CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION">, and Inspection Mode Inspection Mode > ...
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > EvaporatorINSTALLATIONCAUTION:• If the evaporator assembly - cooling has been replaced, add an appropriate amount of compressor oil. Compressor Oil > ADJUSTMENT">• When the evaporator assembly - cooling has been replaced, replace ...
Operating the driver's window
Automatically open/close
Open/close
To open:
Push the switch down lightly and hold it.
The window will open as long as the
switch is held.
This switch also has a one-touch auto
down function. To open the window fully,
push the switch down until it clicks and
then release it. T ...