Subaru Crosstrek Service Manual: Dtc u0073 control module communication bus off
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC U0073 CONTROL MODULE COMMUNICATION BUS OFF
NOTE:
For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure">
1. OUTLINE OF DIAGNOSIS
Detect malfunction of CAN communication.
Judge as NG when CAN communication failure has occurred.
2. COMPONENT DESCRIPTION
(Common Specifications)
CAN Protocol 2.0 B (Active)
Frame Format: 11 Bit ID Frame (Standard Frame)
Conforms to ISO11898
Communication Speed: 500 kbps
3. EXECUTION CONDITION
Secondary Parameters | Execution condition |
Battery voltage | ≥ 10.9 V |
4. GENERAL DRIVING CYCLE
Perform the diagnosis continuously after starting the engine.
5. DIAGNOSTIC METHOD
Judge as NG when the following conditions are established.
Malfunction Criteria | Threshold Value |
CAN bus condition | Bus off |
Time Needed for Diagnosis: 436 ms
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Dtc u0423 invalid data received from instrument panel cluster control module
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULENOTE:For the diagnostic procedure, re ...
Dtc p0128 coolant thermostat (engine coolant temperature below thermostat regulating temperature)
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0128 COOLANT THERMOSTAT (ENGINE COOLANT TEMPERATURE BELOW THERMOSTAT REGULATING TEMPERATURE)DTC detecting co ...
Other materials:
Dtc b1902 short in front p/t rh (to ground)
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1902 SHORT IN FRONT P/T RH (TO GROUND)Diagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Seat belt pretensioner (RH) circuit is shorted to ground.• Pretensioner (RH) is faulty.• ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearINSTALLATION1. Install the transfer driven gear assembly.2. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION">3. Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT">4. Insta ...
Inspection
COOLING(H4DO) > Radiator Fan SystemINSPECTIONOperating condition:Vehicle speedA/C compressor loadEngine coolant temperatureIncrease: 98°C (208°F) or lessDecrease: 96°C (205°F) or lessIncrease: 99 — 101°C (210 — 214°F)Decrease: ...
