ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC P2119 THROTTLE ACTUATOR "A" CONTROL THROTTLE BODY RANGE/PERFORMANCE
NOTE:
For the diagnostic procedure, refer to DTC P2101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2101 THROTTLE ACTUATOR "A" CONTROL MOTOR CIRCUIT RANGE/PERFORMANCE">
1. OUTLINE OF DIAGNOSIS
Judge as NG when the target opening angle and actual opening angle is mismatched or the current to motor is the specified duty or more for specified time continuously.
2. COMPONENT DESCRIPTION
(1) | Motor | (3) | Engine control module (ECM) | (4) | Drive circuit |
(2) | Throttle position sensor |
3. EXECUTION CONDITION
Secondary Parameters | Execution condition |
12 V battery system voltage | 6.2 V |
Throttle motor relay command | ON |
4. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously when the electronic throttle control is operating.
5. DIAGNOSTIC METHOD
Judge as OK and clear the NG when the malfunction criteria below are met.
Diagnosis 1
Malfunction Criteria | Threshold Value |
Output duty to drive circuit | ≥ 95 % |
Time Needed for Diagnosis:
• Engine speed ≥ 500 rpm: 2000 ms
• Engine speed < 500 rpm: 5000 ms
Diagnosis 2
Malfunction Criteria | Threshold Value |
Difference between target opening angle and actual opening angle | Within NG range of Details of Judgment value |
Time Needed for Diagnosis:
• Engine speed ≥ 500 rpm: Refer to Details of Judgment time.
• Engine speed < 500 rpm: 5000 ms
Details of Judgment Value
(X1) | 6.915 ° | (X2) | 11.565 ° | (X3) | 15.785 ° |
(X4) | 21.285 ° | (X5) | 29.965 ° | ||
(Y1) | 4.65 ° | (Y2) | 4.22 ° | (Y3) | 5.5 ° |
(Y4) | 8.68 ° | (Y5) | 25 ° |
Details of Judgment time
(X1) | 8.049999237 ° | (X2) | 9.5 ° | (X3) | 14.5 ° |
(X4) | 23.5 ° | ||||
(Y1) | 1000 ms | (Y2) | 400 ms | (Y3) | 304 ms |
(Y4) | 248 ms |
NOTE:
Judgment time when actual opening angle ≤ target opening angle is always 1000 milliseconds.
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Mode Door ActuatorREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable f ...
Removal
AIRBAG SYSTEM > Driver’s Airbag ModuleREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Position the front wheels straight ahead.2. Tu ...
Installation
ENTERTAINMENT > AudioINSTALLATIONCAUTION:• After installing the center grille assembly, check that the air vent grille of the center grille assembly is inserted correctly into the air vent duct.• Before handling the airbag system components, refer to “CAUTION” of “Ge ...