Subaru Crosstrek Service Manual: Dtc p2005 tgv control stuck open bank 2

Subaru Crosstrek Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p2005 tgv control stuck open bank 2

ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC P2005 TGV CONTROL STUCK OPEN BANK 2

DTC DETECTING CONDITION:

Immediately at fault recognition

CAUTION:

After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION">, and Inspection Mode Inspection Mode > PROCEDURE">.

STEP	CHECK	YES	NO

1.CHECK FOR ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed?

Check the appropriate DTC using the “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)">

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2005 TGV CONTROL STUCK OPEN BANK 2">Go to Step 2.

2.CHECK TUMBLE GENERATOR VALVE LH.

1) Remove the tumble generator valve assembly LH.

2) Check the tumble generator valve.

Is there any dirt or clogging with foreign objects in the tumble generator valve?

Clean the tumble generator valve.

Replace the tumble generator valve LH. Tumble Generator Valve Assembly">

1. OUTLINE OF DIAGNOSIS

Detect the malfunction of tumble generator valve motor function.

Judge open fixing malfunction when the opening degree is large even after finishing the tumble generator valve closing driving.

2. EXECUTION CONDITION

Secondary Parameters	Execution condition
Battery voltage	≥ 10.9 V
Elapsed time of TGV commanded* to "closed"	1600 ms

3. GENERAL DRIVING CYCLE

Always perform the diagnosis continuously.

4. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria	Threshold Value
TGV position	= Open
As defined by: TGV angle position sensor voltage > = 2.5 V	≥ 1600 ms

Malfunction Criteria

Threshold Value

TGV position

= Open

As defined by:

TGV angle position sensor voltage > = 2.5 V

≥ 1600 ms

Time Needed for Diagnosis: 3000 ms

Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

Dtc p2004 tgv control stuck open bank 1

ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2004 TGV CONTROL STUCK OPEN BANK 1DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After serv ...

Dtc p2006 tgv control stuck closed bank 1

ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2006 TGV CONTROL STUCK CLOSED BANK 1DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After se ...

Other materials:

Dtc c0031 fr hold valve malfunction
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0031 FR HOLD VALVE MALFUNCTIONNOTE:For the diagnostic procedure, refer to “DTC C0064 NORMAL CLOSING VALVE 2 MALFUNCTION”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) ...

General diagnostic table Inspection
FRONT SUSPENSION > General Diagnostic TableINSPECTION1. IMPROPER VEHICLE POSTURE OR IMPROPER WHEEL ARCH HEIGHTPossible causeCorrective action(1) Permanent distortion or damage of the coil springReplace.(2) Rough operation of strut or shock absorberReplace.(3) Improper installation of strut or sho ...

Inspection
WIPER AND WASHER SYSTEMS > Front Wiper Motor and LinkINSPECTION1. Check that the following operations perform normally.CAUTION:Fix the motor to prevent the motor from being shorted by moving during operation.(1) When the battery is connected to the terminal of connectors, confirm that the motor o ...