Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc p2004 tgv control stuck open bank 1

ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC P2004 TGV CONTROL STUCK OPEN BANK 1

DTC DETECTING CONDITION:

Immediately at fault recognition

CAUTION:

After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION">, and Inspection Mode Inspection Mode > PROCEDURE">.

STEPCHECKYESNO

1.CHECK FOR ANY OTHER DTC ON DISPLAY.

Is any other DTC displayed?

Check the appropriate DTC using the “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)">

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2004 TGV CONTROL STUCK OPEN BANK 1">Go to Step 2.

2.CHECK TUMBLE GENERATOR VALVE RH.

1) Remove the tumble generator valve assembly RH.

2) Check the tumble generator valve.

Is there any dirt or clogging with foreign objects in the tumble generator valve?

Clean the tumble generator valve.

Replace the tumble generator valve RH. Tumble Generator Valve Assembly">

1. OUTLINE OF DIAGNOSIS

Detect the malfunction of tumble generator valve motor function.

Judge open fixing malfunction when the opening degree is large even after finishing the tumble generator valve closing driving.

2. EXECUTION CONDITION

Secondary Parameters

Execution condition

Battery voltage

≥ 10.9 V

Tumble generator valve “close” signal output time

≥ 1600 ms

3. GENERAL DRIVING CYCLE

Always perform the diagnosis continuously.

4. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria

Threshold Value

TGV position

= Open

As defined by:

TGV angle position sensor voltage > = 2.5 V

Time Needed for Diagnosis: 3000 ms

Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

Dtc p1499 coil 4 egr "a" control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1499 COIL 4 EGR "A" CONTROL CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTr ...

Dtc p2005 tgv control stuck open bank 2
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P2005 TGV CONTROL STUCK OPEN BANK 2DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After serv ...

Other materials:

Dtc b1831 open in curtain airbag rh squib circuit
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1831 OPEN IN CURTAIN AIRBAG RH SQUIB CIRCUITDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Curtain airbag harness (RH) circuit is open.• Curtain airbag module (RH) is faulty.&bul ...

Symbols in wiring diagrams
WIRING SYSTEM > Basic Diagnostic ProcedureSYMBOLS IN WIRING DIAGRAMSA number of symbols are used in each wiring diagram to easily identify parts or circuits.1. RELAYA symbol used to indicate a relay.2. CONNECTOR 1The sketch of the connector indicates the one-pole types.3. WIRING CONNECTIONSome wi ...

Front towing hook
1. Take the towing hook and screwdriver out of the tool bucket. Take the jack handle out of the cargo area. 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch the bumper. Insert the flat-head screwdriver into the cutout of the cover and pry op ...

© 2016-2024 Copyright www.sucross.com