Subaru Crosstrek Service Manual: Dtc p1160 throttle return spring
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC P1160 THROTTLE RETURN SPRING
NOTE:
For the diagnostic procedure, refer to DTC P2101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P2101 THROTTLE ACTUATOR "A" CONTROL MOTOR CIRCUIT RANGE/PERFORMANCE">
1. OUTLINE OF DIAGNOSIS
Judge as NG when the valve is opened more than the default opening angle, but does not move to the close direction with the motor power stopped.
2. COMPONENT DESCRIPTION
(1) | Opener spring | (4) | Full closed stopper | (7) | DC motor |
(2) | Return spring | (5) | Throttle valve | (8) | Main and sub throttle position sensor |
(3) | Intermediate stopper | (6) | Gear |
3. EXECUTION CONDITION
Secondary Parameters | Execution condition |
Battery voltage | ≥ 6 V |
Elapsed time after throttle control power supply off | = 1.6 s |
4. GENERAL DRIVING CYCLE
• Ignition switch ON > OFF
• Ignition switch OFF > ON (Only after clearing memory)
5. DIAGNOSTIC METHOD
Judge as NG when the following conditions are established.
Malfunction Criteria | Threshold Value |
Throttle position (Main Sensor) at power supply off' − Throttle position (Main Sensor) | < 2 ° |
Time Needed for Diagnosis: Less than 1 second
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.
Dtc p081a starter disable circuit low
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P081A STARTER DISABLE CIRCUIT LOWDTC detecting condition:Immediately at fault recognitionTrouble symptom:Fail ...
Dtc p1449 evap system clog detected (air filter)
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1449 EVAP SYSTEM CLOG DETECTED (AIR FILTER)DTC DETECTING CONDITION:Detected when two consecutive driving cyc ...
Other materials:
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Front Differential AssemblyINSTALLATION1. Install the front differential assembly to the converter case.NOTE:Be careful not to damage the inside of the case (especially the mounting surface of the differential side retainers).2. Install the bearing oute ...
Type A
Temperature control dial (Refer to "Temperature
control"
Air conditioner button (Refer to "Air
conditioner control"
Fan speed control dial (Refer to "Fan
speed control"
Air inlet selection button (Refer to "Air
inlet selection"
Airflow mode selection dial (Refer to
"Airflow ...
Installation
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Blower Motor Unit AssemblyINSTALLATIONCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Aft ...
