Subaru Crosstrek Service Manual: Dtc c2522 resolver sensor

Trouble symptom:

• The steering wheel operation feels heavy.

• STEERING warning light illuminates.

1.PERFORM UNIT CHECK OF RESOLVER SENSOR.

1) Turn the ignition switch to OFF.

2) Disconnect the connector (PS1) from the power steering control module.

3) Use a tester to check for continuity in the resolver sensor.

Connector & terminal

(PS1) No. 1 — No. 2 :

(PS1) No. 3 — No. 4 :

(PS1) No. 5 — No. 6 :

Is there continuity?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2522 RESOLVER SENSOR">Go to Step 2.

Replace the steering gearbox. Electric Power Steering Gearbox">

2.CHECK RESOLVER SENSOR INSULATION.

Using a tester, check for short circuits in the resolver sensor.

Connector & terminal

(PS1) No. 1 — Steering gearbox body:

(PS1) No. 2 — Steering gearbox body:

(PS1) No. 3 — Steering gearbox body:

(PS1) No. 4 — Steering gearbox body:

(PS1) No. 5 — Steering gearbox body:

(PS1) No. 6 — Steering gearbox body:

Is the resistance 1 M? or more?

Replace the power steering control module. Power Steering Control Module">

Replace the steering gearbox. Electric Power Steering Gearbox">

Dtc c2521 motor malfunction

Dtc c2531 control module cpu

Other materials:

Refrigerant charging procedure Procedure
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Refrigerant Charging ProcedurePROCEDURECAUTION:• While working, be sure to wear protective goggles and protective gloves.• Air in the cycle can cause insufficient air conditioning, and water in the cycle can cause clogging in the cycle (icing ...

Shift lock function
The shift lock function helps prevent the improper operation of the select lever. The select lever cannot be operated unless the ignition switch is turned to the "ON" position and the brake pedal is depressed. The select lever cannot be moved from the "P" position to any other positio ...

Assembly
CLUTCH SYSTEM > Master CylinderASSEMBLY1. Apply a coat of grease to the contact surfaces of the push rod and piston before installation.Grease:SILICONE GREASE G-40M or equivalent2. Assemble in the reverse order of disassembly.Tightening torque:10 N·m (1.0 kgf-m, 7.4 ft-lb) ...