Subaru Crosstrek Service Manual: Dtc c2324 transmitter 4 function code abnormal

Detected when error data is received from each transmitter at a vehicle speed of 40 km/h (25 MPH) or more.

DTC DETECTING CONDITION:

Unexpected function codes received from each transmitter.

TROUBLE SYMPTOM:

Tire pressure warning light blinks 25 times and then illuminates.

1.REPRODUCTION OF FAILURE.

1) Perform the drive test.

Drive the vehicle at 40 km/h (25 MPH) or faster for at least 10 minutes.

2) Read the DTC of tire pressure monitoring. Read Diagnostic Trouble Code (DTC) > OPERATION">

Is DTC displayed as “Present fault”?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 2.

When DTC is displayed as “Past faults”, the system has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.

NOTE:

In this case, there may be temporary poor communication due to radio wave environment inside/outside the vehicle.

2.START FRONT LEFT TRANSMITTER.

1) Connect the Subaru Select Monitor and then turn the ignition switch to ON.

2) Select «Data monitor» of the tire pressure monitor. Read Current Data">

3) Use the transmitter registration tool and transmit the ID from the front left transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 3.

Replace the front left transmitter. Tire Pressure Monitoring System">

3.CHECK FRONT LEFT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 1».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 4.

Record «Latest reception ID» as the front left. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 4.

4.START FRONT RIGHT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the front right transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 5.

Replace the front right transmitter. Tire Pressure Monitoring System">

5.CHECK FRONT RIGHT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 2».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 6.

Record «Latest reception ID» as the front right. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 6.

6.START REAR RIGHT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the rear right transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 7.

Replace the rear right transmitter. Tire Pressure Monitoring System">

7.CHECK REAR RIGHT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 3».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 8.

Record «Latest reception ID» as the rear right. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 8.

8.START REAR LEFT TRANSMITTER.

Use the transmitter registration tool and transmit the ID from the rear left transmitter to check «Latest reception ID».

Is «Latest reception ID» updated?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 9.

Replace the rear left transmitter. Tire Pressure Monitoring System">

9.CHECK REAR LEFT TRANSMITTER ID.

Compare the ID on the latest ID display with «Registered ID 4».

Are the two IDs same?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 10.

Record «Latest reception ID» as the rear left. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 10.

10.CHECK MALFUNCTION TRANSMITTER.

Is ID recorded by this procedure?

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C2324 TRANSMITTER 4 FUNCTION CODE ABNORMAL">Go to Step 11.

Replace the transmitter indicated by diagnostics trouble code (DTC). Tire Pressure Monitoring System">

11.CHECK MALFUNCTION TRANSMITTER.

Check the registered ID of the transmitter indicated by DTC.

Is there checked ID in the record?

Replace the transmitter of the recorded position. Tire Pressure Monitoring System">

Replace the transmitter indicated by diagnostics trouble code (DTC). Tire Pressure Monitoring System">

Dtc c2323 transmitter 3 function code abnormal

Dtc c2421 transmitter 1 battery voltage low

Other materials:

Inspection
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDetecting condition:Defective harness connectorTrouble symptom:Communication is impossible between the TPMS & keyless entry CM or TPMS CM and the Subaru Select Monitor.WI ...

Trailer towing tips
CAUTION For models equipped with the BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert) driving support systems, when towing a trailer, press the BSD/ RCTA OFF switch to deactivate the system. The system may not operate properly due to the blocked radar waves. For det ...

Note Note
NOTENOTEThis information will improve the efficiency of maintenance and assure the sound work.1. CLEANING• Perform the operation in a clean location and use extra caution in dust proofing.• Clean the items (except for assembly components) with steam, etc. before disassembly. During steam ...