VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC C1412 SELECTED PARAMETER
DTC DETECTING CONDITION:
VDCCM parameter selection error
TROUBLE SYMPTOM:
• ABS does not operate.
• EBD does not operate.
• VDC does not operate.
• Hill start assist does not operate.
NOTE:
When the VDCCM or VDCCM&H/U is replaced, this DTC may be stored.
STEP | CHECK | YES | NO |
1.CHECK VDCCM&H/U IDENTIFICATION SYMBOL.
Check the identification symbol attached on the H/U. General Description > SPECIFICATION">
Is the identification symbol correct?
Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1412 SELECTED PARAMETER">Go to Step 2.
Replace the VDCCM&H/U. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)">
2.CHECK PARAMETER SELECTED IN VDCCM.
Subaru Select Monitor > OPERATION">
Does the parameter registered in the VDCCM match the relevant vehicle?
Replace the VDCCM&H/U. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)">
Select and register the correct parameter. Subaru Select Monitor > OPERATION">
Removal
ENTERTAINMENT > Data Communication ModuleREMOVAL1. DATA COMMUNICATION MODULECAUTION:Before handling the airbag system components, always refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”.1. Disconnect the ground cable from battery and wait for at l ...
Dtc p062f internal control module eeprom error
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P062F INTERNAL CONTROL MODULE EEPROM ERRORNOTE:For the diagnostic procedure, refer to DTC P0606. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0606 CONTROL MODULE PROCESSOR">1. OUT ...
Tire pressure warning light does not come off
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Tire Pressure Warning Light / Trouble Indicator Light Illumination PatternTIRE PRESSURE WARNING LIGHT DOES NOT COME OFFDETECTING CONDITION:• Defective combination meter• Tires pressure drop• Transmitter ID not registeredTROUBLE SYM ...