Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Dtc c1361 normal closing valve 1

VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)

DTC C1361 NORMAL CLOSING VALVE 1

NOTE:

For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 NORMAL CLOSING VALVE 2">

Dtc c1352 normal opening valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1352 NORMAL OPENING VALVE 2NOTE:For the diagnostic procedure, refer to “DTC C1362 NO ...

Dtc c1362 normal closing valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1362 NORMAL CLOSING VALVE 2DTC detecting condition:• Defective harness connector&bul ...

Other materials:

Electrical specification
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Auto A/C Control Module I/O SignalELECTRICAL SPECIFICATIONTerminal No.ContentMeasuring conditionStandard1Mode door actuator #4Digital signal; can not be measured — 2Mode door actuator #3Digital signal; can not be measured — 3Mode door actuator #2Digital ...

Adjustment
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Inhibitor SwitchADJUSTMENT1. Shift the select lever to “N” range.2. Loosen the two bolts holding the inhibitor switch.3. Insert the ST vertically into the holes of the shifter arm and switch body.ST 499267300STOPPER PIN4. Tighten the two ...

Operation
TELEMATICS SYSTEM (DIAGNOSTICS) > Subaru Select MonitorOPERATION• For detailed operation procedures, refer to “Application help”.• When DCM cannot establish communication with Subaru Select Monitor, perform “COMMUNICATION FOR INITIALIZING IMPOSSIBLE”. Subaru S ...

© 2016-2024 Copyright www.sucross.com