EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)
DTC B28AF STEREO CAMERA ADJUSTMENT INCOMPLETE
Detected when adjustment or inspection of stereo camera has not been completed normally.
DTC DETECTING CONDITION:
• Operation is aborted during adjustment or inspection of the stereo camera.
• After the replacement of the stereo camera, adjustment or inspection of camera has not yet been performed.
TROUBLE SYMPTOM:
All functions of EyeSight system do not operate.
For diagnostic procedure, perform adjustment/inspection of camera. When the adjustment or inspection of camera is performed, and if it is not completed successfully, replace the camera.
Inspection
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLEDetecting condition:Defective harness connectorTrouble symptom:Communication is impossible between VDC and Subaru Select Monitor.WIRING DIAGRAM:Models without EyeSightVehicle ...
Dtc u0452 invalid data received from restraints control module
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0452 INVALID DATA RECEIVED FROM RESTRAINTS CONTROL MODULEDetected when CAN data from airbag CM is abnormal.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE"> ...
Adjustment
MECHANICAL(H4DO) > Cam ClearanceADJUSTMENT1. Remove the engine from the vehicle. Engine Assembly > REMOVAL">2. Remove the chain cover. Chain Cover > REMOVAL">3. When adjusting #1 and #3 cylinders(1) Remove the timing chain RH. Timing Chain Assembly > REMOVAL">( ...